Customization: | Available |
---|---|
After-sales Service: | 24-Hour Customer Service Hotline |
Type: | Vickers Hardness Tester |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Product Overview
VHVS-5 / 10 / 30 / 50 AET automatic measurement double touch screen vickers hardness meter, hardness meter host using 8 inch touch screen and high speed ARM processor, and equipped with 15 inch tablet computer, computer control hardness meter host to complete all the operation, make the parameter setting, results show more intuitive, more convenient operation, also avoid the microscope light source to the eye stimulation and visual fatigue, reduce the measurement error.
Product Presentation
lThe fuselage uses high quality cast iron primary casting molding, combined with the car paint treatment process, the shape is round and beautiful;
lThe turbine worm lifting system improves the test stability and test accuracy, and there is no need to focus again after the test;
lEquipped with automatic turret function, high-definition measurement and observation-double objective combination, combined with the built-in length encoder of high-definition microscope, to achieve the diagonal of the indentation one-button measurement, better reduce the human operation interference and reading error;
lConvenient numerical control system, can automatically carry out the full hardness ruler unit conversion;
lThe maximum and minimum value of hardness value can be set, and when the test value exceeds the set range, the beep sound;
lWith the software hardness value correction function, it can directly correct the hardness value within a certain range;
lWith the database function, the test data can be automatically saved in groups, each group can save 10 data, can save more than 2,000 data;
lWith the hardness value curve display function, intuitive display of the change of the hardness value;
lOptional CCD image processing system, and optional NUS pressure head, for Nusi hardness measurement;
lConfigure wireless Bluetooth printer and can output data through RS232 and USB (optional) interface;
lThe accuracy is consistent with GB / T4340.2, ISO6507-2, and ASTM E92
CCD Introduce
lTwo kinds of calibration: optical calibration, (manual / automatic) hardness block calibration. Hardness block supports multiple averaging, arbitrary multiple standard block-segment calibration preferred measurement.
lIn addition to automatic measurement, there are three manual measurements: four-side, diagonal and four-point measurements (four verx selection order can be arbitrary).
lThree indentation marking forms are supported: "rectangular frame", "Red Cross" and "round".
lDuring manual measurement, it has the magnifying fier function to find the indentation peak position; unique keyboard shortcut function to quickly move the selected vertex, make the measurement operation more efficient.
lProvide pixel distance versus physical distance for the indentation diagonal and calculate HV / HK values under the current load in real time.
lSupport a variety of video acquisition equipment, resolution: 1.3 million, 5 million digital cameras; standard with 5 million, display indentation video on the computer, can capture, store images.
lCan display and update the status of the current hardness meter in real time: current pressure head / objective, retention time, load force, etc.
lThe distance between two points can be measured manually; multiple distances can be displayed simultaneously on a video or image.
lThe software will automatically select the best calibration coefficient for different resolutions, different objectives lenses and different loads.
lAll test point information can be identified individually or according to customer requirements. The test point identification information will be displayed in the test value sequence table and the indentation map for easy query. This function is very important for the subsequent analysis and processing.
lAccording to the hardness conversion standards of GB, DIN, ISO, ASTM, etc., Vickers HV, HK, HRC, HRA, HRB, HRD, HRE, HRF, HRG, HRK, surface Rocker: HR15N, HR30N, HR45N, HR15T, HR30T, HR45T, HBS, HBW, etc.
lWhen measuring the hardened layer path sequence, there are several flexible initialization modes to automatically save and import the previous path sequence; the measurement path can also be stored arbitrarily for reloading.
lAnd the corresponding depth value and hardness change curve are automatically generated.
lMultiple measurement data; all results can be included into the graphic report. Report content and format can be flexibly set to automatically generate word and excel documents.
lPassword and administrative permission can be set: ordinary operators can only measure the hardness according to the set setting.
lBuilt-in each standard hardness value conversion tool, can automatically convert the measured hardness value according to the table, and included in the result table.
lSoftware is provided with: Chinese version or English version.
Applied Range
1. Black metal, non-ferrous metal, IC sheet, surface coating, laminated metal;
2. Glass, ceramics, agate, gems, thin plastic, etc.;
3. Hardness test of the depth and gradient of the carbonized and quenching layers.
4. Suitable for precision microscopic Vionchier hardness measurement of parallel plane and small parts and ultrathin parts.
Technical Specifications
Model |
HVS-5/10/30/50AET |
||
Measuring Range |
5-5000HV |
||
Add The Way |
Electric charge |
||
Test Force |
5 Kg series |
0.5,1.0,2.0,2.5,3.0,5.0kgf |
|
10 kg series |
0.5,1.0,2.0,2.5,3.0,5.0,10kgf |
||
30 KG series |
0.5,1.0,2.0,2.5,3.0,5.0,10,20,30kgf |
||
50 KG series |
0.5,1.0,2.0,2.5,3.0,5.0,10,20,30,50kgf |
||
Data Entry Mode |
Automatic |
||
Toward The Way |
Automatic |
||
5 / 10 / 30 / 50: Maximum Test Force Of Vickers Hardness Users Can Choose The Appropriate Configuration According To Their Own Functional Requirements |
|||
Numerical Display |
Touch screen display |
||
Save The Time |
1-99s |
||
Maximum Height Is Allowed For The Specimen |
220mm |
||
Head Center To Machine wall Distance |
130mm |
||
Lens Ratio |
10×,40× |
10×,20× |
|
Total Magnification |
100×,400× |
100×,200× |
|
Minimum Step Distance |
0.025μm |
0.1μm |
|
Hardness Resolution |
0.1HV |
||
Source |
AC 220V,50Hz |
||
Outline Dimension |
620*330*650mm |
||
Weight |
75kg |
Standard Configuration Of Accessories
Micrometer |
One piece |
Daping Test Platform |
One piece |
Xiaoping Test Stage |
One piece |
Type V Test Stand |
One piece |
Diamond Vickers Head |
One piece |
Standard Vickers Hardness Block |
One pieces |
Printer |
One unit |
|
|