| Customization: | Available |
|---|---|
| After-sales Service: | 24-Hour Customer Service Hotline |
| Warranty: | 1year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Presentation
This machine is used for grinding before throwing, for small, not easy to hold or irregular metallographic, rock phase sample inlay. After the inlay, it is easy to grind the sample. It is also beneficial to view the material organization under a gold microscope; test the hardness on the hardness meter.
The machine can work reliably under the following conditions:
1. The altitude is not higher than 1000m.
2. The surrounding medium temperature shall not be higher than + 40 and not less than-10.
3. The air relative humidity is not greater than 85% (at 20).
4. There is no conductive dust, explosive gas, and corrosive gases that seriously damage metals and insulators.
5. No obvious vibrations and bumps.
Technical Specifications
Sample Pressing Diameter: Φ 22, Φ 30, Φ 45mm (choose one of three when ordering)
Temperature Control Range: 0-300
Net Weight: 33kg
Timing Range: 0-30min
Heater: AC 220V / 50Hz / 400W
External Size: 400mm 290mm 400mm
Accessory Box Standard
Host: one unit
Power Cord: one root
Embedding Material:one pack (500g)
Technical Documents: manual, certificate, warranty card -one of each
Actual configuration may vary based on custom requirements.
){kind=link}