Product Presentation
ZXQ-1D automatic gold phase sample inlay machine (electric) is a multi-functional water-cooled inlay machine for various samples. For small and not easy to hold or irregular artifacts to be inlay. After the inlay, it is convenient to grind and throw the workpiece and also convenient for the user to observe the tissue structure of the material under the gallographic microscope.
This function will automatically warm and pressure, after pressing and forming, it will automatically cool and stop, open the upper cover, press the rise button test sample to automatically rise, you can take the parts. Note: limited to thermosetting materials (such as rubber powder), temperature adjusted / controlled.
The machine can work reliably under the following conditions:
1. The altitude is not higher than 1000m.
2. The surrounding medium temperature shall not be higher than + 40 and not less than-10.
3. The air relative humidity is not greater than 85% (at 20).
4. There is no conductive dust, explosive gas, and corrosive gases that seriously damage metals and insulators.
5. No obvious vibrations and bumps.
Technical Specifications
Specification: ф 25mm, ф 30mm, ф 40mm, ф50mm (choose four when ordering)
Heater: 220V / 50Hz / 1100W
Total Power Supply Power: 1100W
Overall Dimension: 700 * 380 * 500mm
Net Weight: 45 Kg Gross weight: 50 Kg
Accessory Box Standard
Host Computer: one unit
Host Computer: one unit
Power Cord: one root
Embedding Material: one bucket
Technical Documents: Instruction manual, certificate of conformity, warranty card - one of each
Actual configuration may vary based on custom requirements.
Audited Supplier 
){kind=link}